eastmanhttp://eastman.blog.co.uk/en-UShourly82000-01-01T12:00+00:00eastmanhttp://eastman.blog.co.uk/http://data5.blog.de/design/preview/e1/1142a61ea41240843c6b773fb29592_160x200.jpgFW: UML Use Case Diagramshttp://eastman.blog.co.uk/2005/10/04/fw_uml_use_case_diagrams~215432/2005-10-04T09:53:09+02:00
UML Use Case
Diagrams
An important part
of the Unified Modeling Language (UML) is the facilities for drawing use case
diagrams. Use cases are used during the analysis phase of a project to identify
and partition system functionality. They separate the system into actors and use cases.
Actors represent
roles that can are played by users of the system. Those users can be humans,
other computers, pieces of hardware, or even other software systems. The only
criterion is that they must be external to the part of the system being
partitioned into use cases. They must supply stimuli to that part of the
system, and the must receive outputs from it.
Use cases describe the behavior of
the system when one of these actors sends one particular stimulus. This
behavior is described textually. It describes the nature of the stimulus that
triggers the use case; the inputs from and outputs to other actors, and the
behaviors that convert the inputs to the outputs. The text of the use case also
usually describes everything that can go wrong during the course of the
specified behavior, and what remedial action the system will take.
For example,
consider a point of sale system. One of the actors is the customer and another
is the sales clerk. Here is just one use case from this system:
Use Case 1: Sales
Clerk checks out an item
1
Customer
sets item on counter.
2
Sales
clerk swipes UPC reader across UPC code on item
3
System
looks up UPC code in database procuring item description and price
4
System
emits audible beep.
5
System
announces item description and price over voice output.
6
System
adds price and item type to current invoice.
7
System
adds price to correct tax subtotal
Error case 1: UPC code
unreadable
If after step 2,
the UPC code was invalid or was not properly read, emit an audible
‘bonk’ sound.
Error case 2: No item in
database
If after step 3 no database entry is
found for the UPC flash the ‘manual entry’ button on the terminal.
Accept key entry of price and tax code from Sales Clerk. Set Item description
to “Unknown item”. Go to step 4.
Clearly a point of
sale system has many more use cases than this. Indeed, for a complex system,
the number can reach into the thousands. The complete functionality of the
system can be described in use cases like this. This makes use cases a powerful
analysis tool.
Drawing Use Case
Diagrams.
Figure 1 shows what the above use
case might look like in UML schematic form. The use case itself is draws as an
oval. The actors are drawns as little stick figures. The actors are
connected to the use case with lines.
Sales Clerk
Customer
Figure 1
Clearly this is a pretty simple notation;
but there is more to it. Use and actor icons can be assembled into large
“system boundary diagrams”. Such diagrams show all the use cases in
a system surrounded by a rectangle. Outside the rectangle are all the actors of
the system, and they are tied to their use cases with lines. The box represents
the system boundary; i.e. it shows all the use cases that are inside a
particular system. Everything inside the box is part of the system. Everything
outside is external to the system. See Figure 2.
Sales Clerk
Inventory
Clerk
Figure 2
Aside from showing the system
boundary, a few more actors, and a few more use cases; this diagram shows some
relationships between the use cases. These relationships are «uses»
and «contains». The uses relationship is the simplest of the two.
Note that it appears twice in Figure 2, once from Check Out Item to Swipe UPC
Reader. The other is from Inventory Item to Swipe UPC Reader. The Swipe UPC
Reader use case describes the behavior of the actor and the system when the
actor swipes the UPC reader across the bar codes on a product.
As we saw in our first use case, the
Swipe UPC Reader behavior needs to occur within the Check Out Item description.
However, since inventory clerks also swipe bar codes while counting objects on
the shelves, this same behavior must be part of the Inventory Item use case.
Rather than write the description for this behavior twice; we can employ the
«uses» relationship to show that it belongs in both use
cases. Having done this we might change the description of the Check Out
Item use case as follows:
Use Case 1: Sales Clerk checks out an item
1
Customer
sets item on counter.
2
«uses»
Swipe UPC Reader.
3
System
looks up UPC code in database procuring item description and price
4
System
emits audible beep.
5
System
announces item description and price over voice output.
6
System
adds price and item type to current invoice.
7
System
adds price to correct tax subtotal
So, the «uses»
relationship is very much like a function call or a subroutine. The use case
being used in this fashion is called an abstract
use case because it cannot exist on its own but must be used by
other uses cases.
The other interesting relationship
is the «extends» relationship between Check Out Item and
Check Out “21” item. In many stores, sales clerks under the age of
21 are not allowed to check out liquor. When an underage sales clerk sees
a liquor item, the clerk shouts “21” over the P.A. system. Soon a
manager walks up and swipes UPC code on the item. This represents a change to
the use case that could be addressed in one of two ways.
First, we could add ‘if’
statements to the Check Out Item use cases such that it looked like this:
Use Case 1: Sales
Clerk checks out an item
1
Customer
sets item on counter.
2.
If item is liquor
2.1.
Call “21” over P.A. system
2.2.
Wait for manager.
2.3.
Manager «uses» Swipe UPC Reader
2.4.
Goto step 4
2
«uses»
Swipe UPC Reader.
3
System
looks up UPC code in database procuring item description and price
4
System
emits audible beep.
5
System
announces item description and price over voice output.
6
System
adds price and item type to current invoice.
7
System
adds price to correct tax subtotal
Although this works fine, it has a
severe disadvantage. Remember the Open Closed Priniple (OCP)? [ note:
cite reference from Engineering
Notebook in 1996] It states that we don’t want to create software that
has to be modified when the requirements change. Rather, in well designed
software, a change in requirements should cause of to add new code rather than change old working
code. The same rules apply to the functional specifications of use cases. When
the requirements change we want to add new use cases, not change old existing
use cases.
Thus, rather than add the if
statement in the use case, we use the «extends» relationship. This
relationship allows us to specify a new use cases that contains commands for
overriding and modifying the extended use case. Thus the Check out
“21” item use case in Figure 2 overrides and extends the Check Out
Item”use case. The text for the Check Out Item use case might appear as
follows:
Use Case 2: Check
Out “21” Item
1. Replace Step 2 of Check Out Item with:
1.1. Call “21” over P.A.
System
1.2. Wait for manager
1.3. Manager
«uses» Swipe UPC Reader
This achieves our goal of allowing new features to be added
to the use case model without needing to change existing use cases.
Extension Points
Notice that the
Check Out “21” Item use cases mentions the “Check Out
Item” use case directly. This is unfortunate. What if we wanted to extend
several other similar use cases in the same way? We’d have to have
as many extending use cases as extended use cases. And all the extending use
cases would be nearly identical.
We can remedy this situation by
adding extension points to the extended use cases. Extension points are simply
symbolic names that identify positions in the extended use case that the
extending use cases can call out. Thus, our two use cases might look like this:
Use Case 1: Sales
Clerk checks out an item
1
Customer
sets item on counter.
2
XP21:
Sales clerk swipes UPC reader across UPC code on item
3
System
looks up UPC code in database procuring item description and price
4
System
emits audible beep.
5
System
announces item description and price over voice output.
6
System
adds price and item type to current invoice.
7
System
adds price to correct tax subtotal
Use Case 2: Check
Out “21” Item
2. Replace XP21 of extended use case with:
2.1. Call “21” over P.A.
System
2.2. Wait for manager
2.3. Manager
«uses» Swipe UPC Reader
Text Management.
One of the problems with document
maintenance is that when a single requirement changes, it may affect many
places within the text of the functional specification. Indeed, sometimes the amount
of redundant information in a functional spec can be very high, causing
significant maintenance problems. The goal of use cases and their relationships
is to manage the textual descriptions within a functional specification, and
thereby reduce the redundant information. By structuring the use cases and
their relationships properly, you can create functional specifications that
never need to be changed in more than one place. For very large projects, this
can be a significant gain.
The Structure of a
use case is not the structure of the software it represents.
It is tempting to look at the
structure of a use case document as a precursor or progenitor of the structure
of the software it represents. However, this is not likely to be the case. Use
cases are structured to minimize textual redundancy. While this is a laudable
goal, it has nothing to do with software design considerations. Thus, the
structure of the use cases is not related to the structure of the resultant
software. Use cases do not represent objects or classes in the eventual
designs. The relationships between use cases do not forshadow relationships in
the software design. The structure of the use cases and the structure of the
software are unrelated.
Use Case Diagrams
have low information content.
Use case diagrams don’t tell
you very much. They convey the structure of the use cases, but tell you very
little about the text within them. As such, they are not particularly
interesting documents when they are separated from their textual descriptions.
At best the diagrams provide a nice roadmap of relationships so that readers
can reconstruct the whole text of
a given scenario by tracing through the «uses» and
«extends» relationships inserting the text of the former, and
modifying the text according to the latter.
Conclusion
Use cases are powerful tools for analysts to use when
partitioning the functionality of a system. Use case relationships and the
corresponding diagrams help analysts to structure use cases such that their
textual descriptions contain a minimum of redundant information; thus making
the whole text document much easier to maintain. But use cases are not design
tools. They do not specify the structure of the eventual software, nor do they
imply the existence of any classes or objects. They are purely functional
descriptions written in a formalism that is completely separate from software
design.
<img src="http://data1.blog.de/blog/e/eastman/img/upload1111.jpeg" border="0" alt="mail2blog">
<img src="http://data1.blog.de/blog/e/eastman/img/upload11111.jpeg" border="0" alt="mail2blog">
<img src="http://data1.blog.de/blog/e/eastman/img/upload111111.jpeg" border="0" alt="mail2blog">
<a href="http://data1.blog.de/blog/e/eastman/img/upload1111111.jpeg" title="mail2blog"><img src="http://data1.blog.de/blog/e/eastman/img/upload1111111_small.jpg" border="0" alt="mail2blog"></a>
<img src="http://data1.blog.de/blog/e/eastman/img/upload11111111.jpeg" border="0" alt="mail2blog">
<p> <small> <a href="http://eastman.blog.co.uk/2005/10/04/fw_uml_use_case_diagrams~215432/#comments">Comments</a> </small> </p>
]]>